当前位置: 首页 > 新闻资讯 > 公司新闻 正文

钢丝网片的表面处理方法!

添加时间:2019-08-30      发布人:http://www.jzqgc.com

  金属丝网是将金属丝经电焊或机织加工成金属丝网,有金属丝网、轧金丝网、钩网三种。一般来说,钢丝网是由低碳钢丝(黑色)制成,这从外观上看是丑陋的,而且防腐性能不佳,这是需要对钢丝网表面进行处理的两个重要原因。
  Metal wire mesh is a kind of wire mesh which is made by welding or weaving. There are three kinds of wire mesh: metal wire mesh, rolled wire mesh and hook mesh. Generally speaking, wire mesh is made of high quality low carbon steel wire (black), which is ugly in appearance and poor in anti-corrosion performance, which are two important reasons for the need to treat the surface of wire mesh.
  脚网厂家生产的丝网板表面处理方法有:冷镀锌、热镀锌、喷塑、浸塑、电镀罗。铁丝网表面处理后,铁丝网防腐性能双打,说冷镀锌,热浸镀锌,这两种方法在网格表面涂有一层锌,防腐的效果和美丽,但这个过程是完全不同的,冷镀锌防腐性能没有镀锌性能很好,但是是冷镀锌是便宜得多。
  The surface treatment methods of wire mesh plate produced by foot mesh manufacturer include cold galvanizing, hot galvanizing, spraying, dipping and electroplating. After surface treatment of wire mesh, the anti-corrosion performance of wire mesh is doubled. First of all, cold galvanizing and hot dipping galvanizing are mentioned. These two methods have a layer of zinc on the surface of grid. The anti-corrosion effect is beautiful, but the process is completely different. The anti-corrosion performance of cold galvanizing is not as good as that of galvanizing, but the price is much cheaper than that of cold galvanizing.
  涂塑网表是我们经常谈论静电粉末喷涂,它是使用静电发生器使塑料粉末带电,吸附表面的铁板,然后通过烘烤180 ~ 220℃,所以粉融化,坚持金属表面,塑料喷雾产品用于室内使用
  Plastic coated mesh is often talked about electrostatic powder spraying. It uses electrostatic generator to electrified plastic powder, adsorb the surface of iron plate, and then bake 180 ~ 220 degrees, so the powder melts, adhere to metal surface, and plastic spray products are used indoors.
  钢丝网框,漆膜呈现扁平或哑光效果。塑料喷粉主要包括丙烯酸粉、聚酯粉等,一般网孔表面的塑料喷层厚度为0.1mm-0.2mm,适合室内使用。
济南钢筋批发
  Steel wire mesh frame, paint film presents flat or matte effect. Plastic powder spraying mainly includes acrylic acid powder, polyester powder, etc. Generally, the thickness of plastic spraying layer on the surface of mesh hole is 0.1mm-0.2mm, which is suitable for indoor use.
  泡塑料网是通过加热金属均匀喷塑料粉末金属形成一层塑料薄膜,或热浸塑料液体冷却的金属零件塑料涂层在金属表面,通常在网格的表面浸塑料层厚度0.7 mm - 0.8 mm,适用于户外,美丽和防腐。
  Soaking plastic mesh is a plastic film formed by uniform spraying of plastic powder metal by heating metal, or the plastic coating of metal parts cooled by hot-dipped plastic liquid is applied on the metal surface. Usually, the thickness of the plastic layer on the surface of the mesh is 0.7 mm - 0.8 mm, which is suitable for outdoor, beautiful and anti-corrosion.
  镀铬丝网硬度高,根据镀液的组成和工艺条件,其硬度可在400 ~ 1200HV之间大范围变化。耐热性好,在500℃下加热,其光泽、硬度均无明显变化。镀铬丝网可与不锈钢丝网相比较。
  The hardness of chromium-plated wire mesh is high. According to the composition of plating solution and technological conditions, the hardness of chromium-plated wire mesh can vary in a wide range from 400 to 1200 HV. It has good heat resistance and no obvious change in gloss and hardness when heated at 500 C. Chromium-plated wire mesh can be compared with stainless steel wire mesh.
上一条: 钢筋焊接网片的需求成倍增长!
下一条: 钢筋网片镀锌处理后的废渣怎么处理?
咨询热线: 13605413762