Wire mesh, also known as wire mesh, is a kind of wire mesh products welded in factories. Longitudinal and transverse reinforcing bars are arranged at a certain interval and at right angles to each other. All intersections are welded together by strong resistance pressure. Steel mesh.

　　产品规格：

　　Product specifications:

　　线径：6-12mm

　　Line diameter: 6-12 mm

　　网眼：50-200mm

　　Mesh: 50-200 mm

　　宽度：0.5-3m

　　Width: 0.5-3m

　　长度：0.5-12m

　　Length: 0.5-12m

　　焊接钢网是国内外公认的新型钢筋混凝土结构钢，广泛用于工业的地板，屋顶，墙壁，地板，混凝土路面，桥面和机场跑道 和民居。  ，隧道衬砌，混凝土管，桩等。

　　Welded steel mesh is a new type of high-efficiency and high-quality reinforced concrete structural steel recognized at home and abroad. It is widely used in industrial floors, roofs, walls, floors, concrete pavement, bridge decks and airport runways and residential buildings. Tunnel lining, concrete pipe, pile, etc.

　　钢筋混凝土表层加固方法：具有大大提高砖墙的承载力，弯曲刚度和壁延性，改变其固有振动频率，提高正常使用阶段性能的优点。 施工过程简单，适应性强，砌体加固后的承载能力大大提高，具有成熟的设计施工经验。 适用于在原墙上没有裂缝和剪切的实心砖墙，多孔（孔径不大于15mm）的空心砖墙和240mm厚的空砖墙。

　　Reinforcement method of reinforced concrete surface layer: It has the advantages of greatly improving the bearing capacity, flexural rigidity and ductility of brick wall, changing its natural vibration frequency and improving its performance in normal service stage. The construction process is simple and adaptable. The bearing capacity of masonry strengthened is greatly improved. It has mature design and construction experience. It is suitable for solid brick walls without cracks and shear on the original wall, hollow brick walls with porous (aperture less than 15 mm) and hollow brick walls with 240 mm thickness.

　　外部粘结的钢加固方法：该方法属于传统的加固方法，是一种通过粘合剂将钢板粘附到墙体裂缝部分的加固方法。 常用的粘合剂主要是环氧树脂。 这种补强方法的优点是结构简单，快速，田间工作量和湿作业小，对生产和寿命的影响小，构件的形状和内部使用空间几乎不变，但剪切力大。 墙壁的容量和正常使用可以大大提高。 舞台的表现是相对可靠的； 它适用于砌体的加固，不允许增加原始构件的截面尺寸，但需要大幅增加截面承载力。

　　Externally bonded steel reinforcement method: This method belongs to the traditional reinforcement method, is a kind of reinforcement method by adhering steel plate to the crack part of the wall through adhesives. The common adhesives are epoxy resin. The advantages of this reinforcement method are simple structure, fast speed, less field work and wet operation, less impact on production and life, almost unchanged shape and internal use space of components, but large shear force. Wall capacity and normal use can be greatly improved. Stage performance is relatively reliable; it is suitable for masonry reinforcement, does not allow the increase of the original section size, but needs to significantly increase the section bearing capacity.