Steel fabric is used in industry and building, but when using steel fabric, the total number of steel fabric should be calculated first, so that there will be no problem in the use process. However, the requirement of calculating the reinforcement net must also be the criterion, so what kind of criterion is the reinforcement net?
Steel mesh is a kind of mesh made of steel wire by electric welding or weaving, except for welded steel mesh, embossed steel mesh and hook steel mesh. Code for calculation of steel mesh for outer wall column: if the section of column is less than the wall thickness, steel mesh is not used for calculation of inner wall column.
The height of the beam and the thickness of the slab (including the layered beam and slab) are deducted from the length of the original outer column steel mesh. The height of buckle beam and slab is based on the actual intersection height of wall beam and slab. Calculation criteria of reinforced mesh: the original length of reinforced mesh of wall beam is calculated according to the original quantity, and column and structural column are deducted. 2. The intersection of beam and slab is the elevation level of beam top and slab top.
If the edge of the beam is on the wall, excluding the level of the wall, and this edge is not calculated for the external wall, blame the top layer (the condition of the wall is not capped), and intersect with the beam of the board of directors, place 3; if the beam is not intersected with the board of directors, place 4. After all, no matter how to use the steel fabric, we need to master its accounting method, as long as the accounting method can correctly use the steel fabric.