钢筋网片的施工并不是很复杂，但是在施工的时候要注意的细节有很多，一旦忽视了一些重要的部分，那么造成的后果是非常的严重的。所以大家在进行钢筋网片施工之前还是多了解一些钢筋网片在施工过程中的技术要求。
The construction of steel mesh is not very complex, but there are many details to be paid attention to during the construction. Once some important parts are ignored, the consequences are very serious. Therefore, we should know more about the technical requirements in the construction process before the construction of steel mesh.
大家都知道钢筋网片是一种新型建筑用墙体材料，替代砖做承重墙等设备，当然也建筑钢筋一起加固墙体，在美观的同时保证了工程质量。采用Q235低碳钢丝、不锈钢丝焊接而成，它可替代砖墙做各种承重墙，非承重墙，阳台等是一种新型建筑用墙体材料。替代砖做承重墙更加结实。
As we all know, reinforced mesh is a new type of wall material for building, which can replace brick as load-bearing wall and other equipment. Of course, it can also reinforce the wall together with building reinforcement, ensuring the engineering quality while being beautiful. It is welded with high quality Q235 low carbon steel wire and stainless steel wire. It can replace brick wall to make all kinds of load-bearing wall, non load-bearing wall, balcony and so on. Replace brick to make bearing wall stronger.
钢筋网片只要检查焊接部位，用的低碳钢丝进行制作，没有太大的技术要求，网孔设计均匀，网面平整，根据需求也可以喷涂各种颜色。
As long as the welded parts of the reinforcement mesh are inspected and made of high-quality low-carbon steel wire, there is no too large technical requirements. The mesh design is uniform and the mesh surface is flat. According to the requirements, various colors can also be sprayed.
我国企业目前生产建筑用热轧带肋钢筋主要依据我国标准GB1499-1998,也有部分生产根据特殊需要、按国外同类产品的标准为依据组织生产，例如采用英标BS4449:1988生产BSG460等。
At present, the production of hot-rolled ribbed steel bars for construction by Chinese enterprises is mainly based on the Chinese standard GB1499-1998, and some production is organized according to the special needs and the standards of similar foreign products, for example, BSG460 is produced by adopting the British standard bs4449:1988.
在建筑钢筋力学性能方面氮含量应不大于0.012%.钢中如有足够数量的氮结合元素，含氮量的限制可适当放宽。其实除了上面的内容之外，关于钢筋网片施工技术的要求还有非常的多内容需要大家去掌握。
In terms of mechanical properties of building reinforcement, the nitrogen content shall not be more than 0.012%. If there are enough nitrogen binding elements in steel, the limit of nitrogen content can be appropriately relaxed. In fact, in addition to the above content, there are a lot of requirements on the construction technology of steel mesh that we need to master.
This article is published by http://www.jzqgc.com/
咨询热线： 13605413762
