当前位置: 首页 > 新闻资讯 > 公司新闻 正文

齿形钢筋网生产和安装有什么要求?

添加时间:2020-03-05      发布人:http://www.jzqgc.com

  钢网的生产和安装证实了这些数据。钢筋网是将纵向和横向的钢筋按一定的距离和角度排列,所有的焊接点焊接在一起的钢筋网。
  The production and installation of steel mesh confirm these data. Reinforcing mesh is a kind of reinforcing mesh that arranges the longitudinal and transverse reinforcing bars according to a certain distance and angle, and all welding points are welded together.
  1. 带钢的厚度误差是常见的钢铁生产,这个误差范围很难控制在生产工程中,主要是因为的过程,磨料磨具的磨损(基本类型的组件失败),导致钢的错误,这是不容易控制,但是在这个0。25毫米的射程是可以控制的,超过这个范围就会有蓄意的怀疑。
  1. The thickness error of strip steel is a common steel production, and this error range is difficult to control in production engineering, mainly because the final process, abrasive wear (basic type of component failure), leads to steel errors, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which there is deliberate suspicion.
  2. 钢筋网适用于工厂生产,用冷轧带肋钢或冷轧圆钢焊接而成,是一种良好、的混凝土配合比材料。钢(英语:钢筋)净形状大小5毫米,误差范围是原板在切割过程中,如果做了,在错误不会影响钢结构的安装铺设,如果大于错误,可能空间,或者不能购物,但是我们公司,经过多年的经验,基本已经控制误差范围在1 - 2毫米。
  2. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The net shape and size of steel (English: steel bar) are 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.
济南钢筋批发
  3.对角线误差:这种误差主要是由于制钢过程中,挤压,或塑料修理引起的热量不均造成的。
  3. Diagonal error: this error is mainly caused by uneven heat caused by extrusion or plastic repair during steel making.
  4,。钢网的平整度是由钢网焊机的压力焊接工艺引起的。安装固定后,钢网完全保持平整。另外,我公司采用大型钢筋网压焊机,马华钢、扁钢的平整度均小于0。5mm也是检验焊接质量的重要指标
  4, The flatness of the steel mesh is caused by the pressure welding process of the steel mesh welder. After installation and fixation, the steel mesh shall be completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Mahua steel and flat steel is less than 0. 5mm is also an important index for welding quality inspection
  如果你有济南钢筋批发的需求可以点击我们的官网进行咨询:http://www.jzqgc.com/
  If you have the demand of Jinan Steel wholesale, you can click our official website for consultation: http://www.jzqgc.com/
上一条: 钢筋网为什么要采用热钢?
下一条: 如何检验测定建筑钢筋烧焊的质量?
咨询热线: 13605413762