There are generally three types of steel mesh in Construction: Tower stacking method, buckling method and flat method. The advantages of overlapping method and buckling method are that the number of steel bars is small and the installation is convenient, but the number of steel bars at the joint is large, which affects the stress of the steel mesh. The horizontal reinforcement and the vertical reinforcement at the overlapping point of plane overlapping method are in the same plane, the stress is better, but the overlapping length is greater than the former. The following is the operation specification for installation of building mesh. We hope that we will install in strict accordance with the operation specifications in the construction process. To ensure our personal safety.

　　如何安装和使用建筑钢筋网

　　How to install and use building steel fabric
               

　　有两种类型的建筑网片搭接：受力搭接和非受力搭接。根据规格要求，搭接长度和锚定长度指定如下：

　　There are two types of building mesh lap: stressed lap and unstressed lap. According to the specifications, the lap length and anchor length are specified as follows:

　　1.当承重钢筋采用搭接法或屈曲法时，每个建筑网在搭接范围内应少有一个横向钢筋，且两个建筑网中靠外面的一个之间的距离不应小于小于50mm，且两块建筑网的搭接长度应不小于d（混凝土强度等于C35）且不小于200mm；当钢筋采用扁平钢筋法时，两块钢筋网的搭接长度应不小于37d（混凝土强度等于C35），且不小于300mm。

　　1. When the load-bearing reinforcement adopts the lapping method or the buckling method, there shall be at least one transverse reinforcement in the lapping range of each building network, and the distance between one of the two building networks close to the outside shall not be less than 50 mm, and the lapping length of the two building networks shall not be less than D (concrete strength is equal to C35) and not less than 200 mm; when the reinforcement adopts the flat reinforcement method, the lapping of the two building networks The joint length shall not be less than 37d (concrete strength equal to C35) and not less than 300mm.

　　如何安装和使用建筑钢筋网

　　How to install and use building steel fabric

　　2，无应力钢筋采用搭接或屈曲方式时，每个钢筋网在搭接范围内少有一根主钢筋，搭接长度应不小于20d且不小于150mm；采用平面重叠法时，重叠长度应不小于20d且不小于200mm。

　　2. When the unstressed reinforcement is overlapped or buckled, there shall be at least one main reinforcement within the overlapping range of each reinforcement mesh, and the overlapping length shall be no less than 20d and no less than 150 mm; when the plane overlapping method is adopted, the overlapping length shall be no less than 20d and no less than 200 mm.

　　3.冷轧带肋钢丝网的锚固长度应不小于28d（锚固长度上有横向钢筋且混凝土强度等于C35时）且不小于200mm。

　　3. The anchoring length of cold-rolled ribbed steel wire mesh shall not be less than 28d (when there is transverse reinforcement on the anchoring length and the concrete strength is equal to C35) and not less than 200mm.

　　以上是关于建筑网片的使用方法，由济南钢筋批发整理提供，想要了解更多内容，欢迎咨询http://www.jzqgc.com网站。

　　The above is about the use of building mesh, which is provided by Jinan Steel wholesale. If you want to know more, please consult us http://www.jzqgc.com Website.