Matters needing attention when using steel wire mesh: First, in the construction of steel wire mesh, the mesh should be above the rough surface or sharp edge; construction personnel should pay attention to safety protection when loading and unloading steel plate.

　　钢网若放置时间过长，施工时应进行除锈处理，若有严重的酸腐蚀，周围的碱烟无法使用，应予以。

　　If the steel mesh is placed too long, the construction should be rust removal treatment, if there is serious acid corrosion, the surrounding alkali smoke can not be used, it should be eliminated.

　　钢网片在受冲击大、变形严重、搭接脱落、修复或更换时，不得勉强使用。

　　Steel meshes shall not be used reluctantly when subjected to heavy impact, serious deformation, lapping off, repairing or replacing.

　　淘气泥灰泥受污物污染或嵌在净砂浆上，泥灰颗粒等异物可能引起磨损，应清洗干净，自然晾干后。

　　The naughty mortar is contaminated by dirt or embedded in the clean mortar. Foreign bodies such as mud particles may cause wear and tear. It should be cleaned and dried naturally.

　　织物面料出口严格时,钢筋件镀锌一般分为两种形式,一是镀锌丝用于焊接,另一个是黑丝(或冷轧带肋钢筋),完成后焊接镀锌完成镀锌工厂后,出口钢网与后者,即焊后,电镀过程效果好,坚实的焊点。

　　When fabric export is strict, steel bar galvanizing is generally divided into two forms, one is galvanized wire for welding, the other is black wire (or cold-rolled ribbed steel bar). After the completion of galvanized factory, the export steel mesh and the latter, that is, after the first welding, the galvanized process has good effect and solid solder joints.

　　很少直接出口而不镀锌。

　　It seldom exports directly without galvanizing.

　　在制作屏幕时经常会遇到是否留下毛边和没有毛边的情况，大多数导出的毛边都不是左毛边，也很少有情况下会有左毛边。

　　When making a screen, we often encounter the situation of whether or not there is a wool edge and no wool edge. Most of the exported wool edges are not left wool edges, and seldom have left wool edges.

　　还需要注意的是热浸镀锌钢丝网片的锌含量相对较高的一般可以达到250 g使用寿命长,不易腐蚀和生锈,质量高,焊接点相对稳固,美丽的外表,所以一般出口更多,具体规格根据客户要求定制。

　　It should also be noted that the relatively high zinc content of hot dip galvanized steel wire mesh can generally reach 250 g long service life, not easy to corrosion and rust, high quality, relatively stable welding points, beautiful appearance, so generally more exports, specific specifications are customized according to customer requirements.